MAGIC® APPLICATION GUIDE
TOTAL-PHOTO M™ /UNIVERSAL
Matte Photrealistic Paper
For Aqueous Dye & Pigment & Solvent Systems
magic
MAGIC® TOTAL-PHOTO M™ is a 6.5 mil universal matte photorealistic paper for use on both aqueous dye & pigment as well as solvent and eco-solvent ink jet printers. The ultra smooth matte surface, combined with high ink saturation provides a rich density for photographic images. The high caliper and sealed base sheet eliminates cockle and promotes easy handling during lamination and mounting. Total-Photo M™ is ideal for photo reproductions, P.O.P. graphics, premium indoor signs, and posters.


PHYSICAL PROPERTIES
6.5 mil / 165 microns
176 g/m²
97%
111
2.4
70°F (35-70% RH)
Aqueous Dye & Pigment & Solvent & Eco-solvent
Caliper
Basis Weight
Opacity
Whiteness
Gloss of Print Side (60°)
Optimum Printing Environment
Recommended Printing Device



APPLICATION GUIDELINES
Imaging:
The print side is the matte side and it is wound to the outside of the roll.

Printer & Ink Compatibility:
Total-Photo M™ is totally universal and compatible with printers such as HP DesignJet®, Epson Stylus®, and Canon® series printers as well as solvent and eco-solvent systems manufactured by Vutek®, Mimaki®, and Mutoh®, etc. Although dye-based inks provide a higher color gamut, ink fade can occur.

Printer settings:
To optimize print quality, printers should be set for the highest print quality. The media selection is "Heavy Weight Coated Paper" for the HPDesignJet series printers, 200% max ink saturation. Media setting for the Epson 9800UC/K3 MK is "Ultra Smooth Fine Art, 2880 dpi, finest detail, edge smoothing". Media setting for the Epson 9600 UC/MK is "Smooth Fine Art, 1400 dpi, finest detail, edge smoothing". To optimize print quality on the solvent ink jet printers, 720 dpi bidirection will offer the best results. Optimized printer settings will vary from printer manufacturer. 450C to 550C is a good temperature starting point for both pre and post heaters.

Water Resistance:
Total-Photo M™ in conjunction with pigment inks has excellent water resistance. Dye-based inks have a moderate level of water resistance. Lamination is recommended when an image will be exposed to repeated physical handling or when prolonged product life is needed.

Light stability:
Pigment inks provide the best long-term UV fade and water resistance.

Material Settings:
To protect unused material, store material in its original packaging, in the poly bag at 72°F (+/-5).


FINISHING RECOMMENDATIONS
Lamination:
Total-Photo M™ may be overlaminated with most cold laminates and low temperature hot laminates, but cold are preferred and give better adhesion results. Make sure the images are completely dry prior to laminating. When the paper is overlaminated with heavy gauge laminates and either mounted to a board or encapsulated, overlap the image with a 0.25 inch safe edge of laminate. This will seal the paper, preventing moisture absorption and paper splitting from the undue stress of the heavy gauge laminating films. Use laminates of equal gauge when encapsulating to prevent image curl.

Mounting:
Cold, pressure-sensitive adhesives typically provide the most aggressive bonds and are recommended for use with Total-Photo M™.


RECYCLE AND DISPOSAL
Disposal by recycling of ink jet media is the preferred method. Where recycle markets do not exist, disposal by land fill paper or an approved incinerator is acceptable.
www.ppmsupplies.nl