PRODUCT DATA GLOSS BACKLIGHT FILM 200 MICRON SGBL200
PRODUCT TYPE:
Polyester film for inkjet printing with ecosolventplus, solvent and uv-curing inks.APPEARANCE:
TranslucentSURFACE FINISH:
Gloss printable coating one side, antistatic translucent lightblock reversePHYSICAL CHARACTERISTICS:
Test method
Electronic micrometer
Internal method
DCI Spectraflash (D65 10° UV incl.)
Typical Value
200
260
L 96.00
a -1.00
b 5.00
Total Thickness μ
Total Weight (gsm)
CIE Coordinates
COMPATIBILITY:
Ecosolvent + inks, Roland Soljet, Versacamm, Mutoh Rockhopper II, etc. Solvent inks such as Grenadier.Please make your own assessment though, as solvent inks can vary widely. This is more dependent on ink manufacturer and type than it is on printing machine.
APPLICATIONS AND CHARACTERISTICS:
- Weighter, stiffer, high-impact backlight with optimum depth and brillance
- Front print on high gloss coating with light-diffusing back-coat;
- Print and post: no lamination necessary;
- Weather- and scuff-resistant for scrolling displays.
RECOMMENDATIONS:
- Conditions for use: 10°C - 30°C, 30% - 70% RH
- Conditions for storage: 10°C - 30°C, 20% - 70% RH
MATERIAL HANDLING AND SHELF LIFE:
24 Months.IMPORTANT NOTICE:
The information provided herein is correct to the best of our knowledge. No liability for any errors, facts or opinions is accepted. You must satisfy yourself as to the suitability of this product for your application. No responsibility for any loss as a result of any person placing reliance on any material contained herein can be accepted.
www.ppmsupplies.nl